Machine registration Register
Send request
Find contact person

Products & Accessories

Information

R26

R26

Secure. Unload. Reuse.

The dry pre-separator for additive manufacturing: The R26 protects components, recovers valuable metal powder, and makes post-processing faster, cleaner, and more cost-effective—as an intelligent pre-separator positioned before the wet separator.

  • Function: Dry pre-separation of metal powder
  • Benefit: Reuse of collected material possible
  • Application: Post-processing in additive manufacturing
  • System: Operation upstream of wet separator (NA7 / NA11 / NA35)
  • Tank sizes: 3.5 L · 7.5 L · 22.5 L
  • Safety: Equipotential bonding & fill level monitoring
  • ROI: Reduced powder, maintenance, and disposal costs
Watch Video

    The R26 is a dry pre-separator for additive manufacturing designed to reliably recover metal powder. It gently separates excess powder before the wet separator, reducing contamination and maintenance requirements. For post-processing operations that minimize powder loss, protect components, and improve cost-effectiveness.

    The highlights.

    Safely remove powder. Fully unpack parts. Powder residue in channels, support structures, and complex geometries is reliably removed—ensuring fully cleaned parts and stable downstream processes.

    Safely remove powder. Fully unpack parts. Powder residue in channels, support structures, and complex geometries is reliably removed—ensuring fully cleaned parts and stable downstream processes.

    Significantly faster post-processing. Manual rework such as brushing, tapping, or blowing is largely eliminated. Unpacking time is noticeably reduced, and throughput increases.

    Significantly faster post-processing. Manual rework such as brushing, tapping, or blowing is largely eliminated. Unpacking time is noticeably reduced, and throughput increases.

    Gentle on delicate geometries. Controlled suction does not place mechanical stress on components. Thin-walled areas and fine structures remain undamaged, and scrap is reduced.

    Gentle on delicate geometries. Controlled suction does not place mechanical stress on components. Thin-walled areas and fine structures remain undamaged, and scrap is reduced.

    Recover powder instead of losing it. The extracted metal powder is cleanly separated and made reusable. Valuable materials remain in the cycle—with a measurable ROI included.

    Recover powder instead of losing it. The extracted metal powder is cleanly separated and made reusable. Valuable materials remain in the cycle—with a measurable ROI included.

    Clean work environment. Powder enters the system directly, not the surrounding area. Exposure is reduced, air quality improves, and the workplace stays clean.

    Clean work environment. Powder enters the system directly, not the surrounding area. Exposure is reduced, air quality improves, and the workplace stays clean.

    Overall economic process. Less contamination in the wet separator means less maintenance, less liquid waste, and lower disposal costs—the process pays for itself more quickly.

    Overall economic process. Less contamination in the wet separator means less maintenance, less liquid waste, and lower disposal costs—the process pays for itself more quickly.

    Take a closer look.

    R26
    R26 – Certificates
    3D model is loading...
    Use the left and right arrow keys to switch
    Recover value. Avoid losses.

    Recover value. Avoid losses.

    The R26 moves a crucial step in post-processing to the right place: before the wet separator. Metal powder is separated dry and in a controlled manner before it comes into contact with liquid. This keeps the material clean, free of contaminants, and reusable.

    What is lost in many processes remains in the cycle here. Valuable powder fractions are recovered, material yield increases, and the need for new powder decreases. At the same time, the entire workflow stabilizes: consistent powder quality, reproducible results, and post-processing that becomes predictable.

    The R26 is therefore not just an accessory, but an economic lever in the additive process—measurable in ROI, noticeable in everyday operations, and relevant for quality, costs, and sustainability.

    Powder Cleanly Separated

    • The metal powder is separated in a dry state—free of liquid and ready for reprocessing.

    Reduce material costs

    • Less powder loss means lower costs per build and faster payback.

    More stable downstream processes

    • Consistent powder quality ensures reproducible results throughout the entire AM workflow.
    Less effort. More impact in the process.

    Less effort. More impact in the process.

    The R26 reduces the load on downstream systems where it matters most operationally: before the wet separator. The metal powder is separated in a dry state before it comes into contact with liquid. As a result, wet separators stay cleaner, maintenance intervals are extended, and waste volumes are significantly reduced.

    The result is not a spectacular effect, but rather quiet, stable operation: less cleaning effort, fewer downtimes, lower costs. The process becomes more predictable—and that is precisely where its strength lies.

    Less pollution

    • – Very little powder in the wet separator, which means less cleaning and maintenance.

    Longer maintenance intervals

    • – Clean fluid means longer intervals between service visits.

    Lower disposal costs

    • – Less contaminated liquid reduces the effort and costs associated with disposal.

    Strong in the details.

    RUWAC dry pre-separators aren’t just made of high-quality components—they’re built on well-thought-out solutions. From the housing to the control system, every detail is designed for durability, safety, and efficiency. For everyone who relies on reliable technology every day.

    Efficient separation. Cleanly executed.

    The high-speed cyclone effectively separates metal powder from the air stream before it enters the wet separator. The flow path is designed to ensure that the powder is separated in a controlled manner—without turbulence, without mixing, and without contamination.
    The result: dry, separated powder ready for reprocessing, and a wet separator that is subjected to significantly less stress.

    Three container sizes. Perfect for the job.

    The R26 is available with collection containers in 3.5 L, 7.5 L, or 22.5 L capacities. This allows the volume to be precisely adjusted to the size variant, powder quantity, and process cycle.

    Empties safely. Without releasing dust.

    The integrated disc valves enable controlled, low-dust discharge of the powder. The container can be closed, replaced, and reinserted without powder escaping into the surrounding area. This protects employees, keeps the work area clean, and makes the discharge process reproducible and safe.

    Seamlessly integrable. No system disruption.

    The R26 is designed for use in combination with RUWAC wet separators such as the NA7-11, NA7-26, and NA35. It can be permanently mounted or flexibly positioned—depending on the layout and process requirements. This creates a closed, integrated extraction system that logically combines powder recovery, wet separation, and safety.

    Maintenance that goes the extra mile.

    Maintenance that goes the extra mile.

    Industrial vacuum systems have to work reliably at all times. RUWAC Asia supports customers through regional sales, service and partner teams across Asia—responsive, technically experienced and close to your operation.

    Our specialists understand RUWAC systems and coordinate the right technical support, spare parts and service response for your location.

    RUWAC Service helps keep production running, protect your investment and extend equipment life, with maintenance and support planned around your operating requirements.

     

    Protects what matters. Without compromise.

    What sets RUWAC apart is that we take responsibility. For people, processes, the environment—and for the moment when it really counts. Our equipment is designed for maximum safety. And so are we. From explosion protection to health and sustainability to fast on-site service: at RUWAC, safety means you can rely on everything. And on everyone.

    Product safety

    Product safety

    Our industrial vacuums meet the highest safety standards - optionally with ATEX certification, a robust design, and well-thought-out protection mechanisms. For permanently safe operation - even under extreme conditions.

    Workplace safety

    Workplace safety

    Ergonomic design, easy handling, and clearly recognizable controls reduce risks in everyday work - and create more safety directly at the point of use.

    Health protection

    Health protection

    We filter before danger arises: our systems minimize fine dust exposure, reduce noise emissions, and actively contribute to workplace health protection.

    Environmental protection

    Environmental protection

    Sustainability is an integral part of our development process. Our systems are energy-efficient, built to last, and made from recyclable materials.

    Fast local support

    Fast local support

    Safety through proximity: our sales and service teams are deployed nationwide - with experience, technical know-how, and what often matters most: availability. Our service technicians carry many spare parts directly in their vehicles - for immediate help without waiting.

    Investment security

    Investment security

    A Ruwac lasts. High-quality components, modular technology, and reliable support safeguard your investment - today and for many decades to come. This creates real operational security - backed by manufacturing in Germany that sets standards in sustainability, efficiency, and occupational safety.

    Why RUWAC is the best place to buy your dry pre-separator.Why RUWAC?

    RUWAC quality. Supported across Asia.

    Every RUWAC system is built to defined quality standards. RUWAC Asia provides regional application engineering, commissioning and after-sales support from Chonburi.

    The perfect device for you

    We listen—and then develop a solution that perfectly meets your needs.

    Extremely durable

    Whether it's fiberglass-reinforced plastic or sheet steel—we rely on materials that are sturdy, durable, and safe. Even under the toughest conditions.

    The Right Filter

    Specialized filters designed for your specific application—developed in collaboration with leading filtration experts.

    Always one step ahead

    Decades of experience—combined with our own research and development.

    50 Years of Quality

    Committed to building the best extraction technology since 1976. Every day.

    In-depth insights.

    PDF Downloads

    Videos

    Frequently Asked Questions (FAQ)

    The R26 is used in the post-processing stage of additive manufacturing to extract excess metal powder from components and build chambers and separate it in a dry state before it reaches the wet separator. This ensures that the powder remains reusable while reducing the load on downstream systems.

    Yes. The R26 discharges the powder cleanly and dry. It does not come into contact with any liquid and can therefore be recycled and reused—a key factor in cost-effectiveness.

    The R26 reduces powder losses, shortens depowdering times and lowers maintenance and disposal costs for the wet separator. Time savings, lower material consumption and longer service intervals contribute to its return on investment.

    The powder enters the closed system directly rather than being released into the environment. This reduces exposure, dust levels, and risks associated with reactive atmospheres—especially when using aluminum or titanium powders.

    The R26 is designed for use with RUWAC NA7, NA11, NA26, and NA35 wet separators. It can be permanently integrated or flexibly installed upstream.

    The R26 is available with collection containers in 3.5 L, 7.5 L, and 22.5 L sizes. This allows the volume to be precisely adjusted to the size variant, powder quantity, and process duration.

    The fill level can be monitored visually through a sight glass or, optionally, via a sensor. When the tank is full, the suction process is automatically interrupted—ensuring safe, controlled operation.

    R26
    R26

    Housing

    sheet steel

    Height

    1,510 mm / 1,594 mm

    width

    660 mm / 756 mm

    Length

    640 mm

    Material Collection Bin

    Stainless steel

    Capacity of the collection container

    3.5 L / 7.5 L / 22.5 L

    Suction port

    30 mm / 50 mm

    R26

    Secure. Unload. Reuse.

    R26

    Accessories wishlist

    Your saved items - you can adjust quantities directly here.

    Your wishlist is empty.

      Please review your saved accessories and then confirm.

      Accessories wishlist

      Cookie Settings

      We use cookies on our website. Some of them are technically necessary, while others help us improve this website or provide additional features.

      Necessary cookies

      Essential cookies enable basic functions and are necessary for the website to work properly.

      Name: cookie_consent
      Purpose: This cookie stores the user's selected consent options
      Cookie duration: 1 year
      Statistics

      Statistics cookies collect information anonymously. This information helps us understand how our visitors use our website.

      Name: Google Analytics
      Provider: Google
      Purpose: Statistics
      Cookie duration: 400
      Name: _clck
      Provider: Microsoft
      Cookie duration: 360
      Marketing

      Marketing cookies are used by third-party providers to display personalized ads. They do this by tracking visitors across websites.

      Name: Elfsight Chatbot
      Provider: Elfsight
      Purpose: Chatbot
      Cookie duration: 200
      External media

      In order to display content from video and social media platforms, these external sites set cookies.

      Name: YouTube
      Provider: Google
      Purpose: External videos
      Cookie duration: 356 days
      Imprint | Datapolicy